POM Plastic Properties, Processing and Applications for Engineers

Nov 05, 2026 Leave a message

POM earns its Chinese nickname, Saigang, from the way it holds shape under load. It is a crystalline plastic with high rigidity, and it stays tough and elastic where many other materials turn brittle. Engineers rely on it for creep resistance, geometric stability and impact resistance at low temperatures. Fatigue resistance, wear resistance and heat resistance all come standard.

Moisture uptake is minimal, which simplifies storage and processing. Specific gravity sits at 1.42 g/cm3. The heat deformation temperature reaches 172℃. Crystallinity, however, works against dimensional accuracy: shrinkage runs around 2.1% and can climb to 2%3.5% depending on grade and reinforcement. Different reinforced materials shrink at different rates, so tight-tolerance parts demand careful material selection.

Two families of POM exist, and the choice matters. Homopolymer grades bring better ductility and fatigue strength, but they are harder to process. Copolymer grades offer thermal stability and chemical stability, and they mold more easily. Both are crystalline and both resist moisture absorption.

POM plastic injection molded gears and bearings

Processing POM rewards precision. No pre-drying is required, which saves a step, but preheating to about 100℃ during molding helps hold product dimensions. The processing window is narrow: 195215℃ is the safe band. Leave the material in the barrel too long or push past 220℃ and it begins to decompose. Homopolymer grades tolerate 190230℃; copolymer grades prefer 190210℃. Keep screw speed moderate and residual volume small.

Mold design carries equal weight. High specific heat and high shrinkage call for a mold temperature between 80105℃, and a hotter mold helps curb post-molding shrinkage. Parts come off the tool hot enough to scald bare fingers, so plan handling accordingly. Injection pressure of 7001200bar works well, with medium pressure, medium speed and high mold temperature as the general recipe.

Runners and gates are flexible. Any gate type is acceptable. If a tunnel gate fits the part, choose a short one. Homopolymer grades pair best with a hot nozzle runner. Copolymer grades accept internal and external hot runners alike.

Low friction and stable geometry make POM a natural fit for gears and bearings. Heat resistance extends its reach into pipeline valves, pump housings and lawn equipment components that see sustained operation.

Related capability: Explore TCHD’s plastic injection molding capabilities, or send your drawing and production requirements for a technical review.